APT10: sophisticated multi-layered loader Ecipekac discovered in A41APT campaign

Why is the campaign called A41APT?

In 2019, we observed an APT campaign targeting multiple industries, including the Japanese manufacturing industry and its overseas operations, that was designed to steal information. We named the campaign A41APT (not APT41) which is derived from the host name “DESKTOP-A41UVJV” from the attacker’s system used in the initial infection. The actor leveraged vulnerabilities in Pulse Connect Secure in order to hijack VPN sessions, or took advantage of system credentials that were stolen in previous operations.

APT10 and the A41 APT campaign 01

Log of the hijacking VPN session from DESKTOP-A41UVJV

A41APT is a long-running campaign with activities detected from March 2019 to the end of December 2020. Most of the discovered malware families are fileless malware and they have not been seen before. One particular piece of malware from this campaign is called Ecipekac (a.k.a DESLoader, SigLoader, and HEAVYHAND). It is a very sophisticated multi-layer loader module used to deliver payloads such as SodaMaster (a.k.a DelfsCake, dfls, and DARKTOWN), P8RAT (a.k.a GreetCake, and HEAVYPOT) and FYAnti (a.k.a DILLJUICE stage2) which loads QuasarRAT.

In November and December 2020, Symantec and LAC both published blogposts about this campaign. A month later, we discovered new activities from A41APT that utilized modified and updated payloads, and that’s what we cover in this blog.

In February 2021, a GReAT security expert and his friends gave a presentation on the A41APT campaign at the GReAT Ideas event. You can download the slides here. Further information about A41APT is available to customers of the Kaspersky Intelligence Reporting service. Contact intelreports@kaspersky.com

Technical analysis: Ecipekac

We observed a multi-layer x64 loader used exclusively by this actor and dubbed Ecipekac after a unique string found in the second layer of the Ecipekac loader. The string is “Cake piece” in reverse (with a typo).

APT10 and the A41 APT campaign 02

The hardcoded unique string “ecipekac”

Ecipekac uses a new, complicated loading schema: it uses the four files listed below to load and decrypt four fileless loader modules one after the other to eventually load the final payload in memory.

APT10 and the A41 APT campaign 03

Ecipekac infection flow

The files are:

Filename MD5 Hash Description
policytool.exe 7e2b9e1f651fa5454d45b974d00512fb Legitimate exe for DLL side-loading
jli.dll be53764063bb1d054d78f2bf08fb90f3 Ecipekac Layer I loader
vac.dll f60f7a1736840a6149d478b23611d561 Encrypted Ecipekac Layer II loader (shellcode)
pcasvc.dll 59747955a8874ff74ce415e56d8beb9c Encrypted Ecipekac Layer IV loader (shellcode)

Please note that the Ecipekac Layer III loader module is embedded in the encrypted Layer II loader.

Ecipekac: Layer I loader

APT10 and the A41 APT campaign 04

Layer I of Ecipekac infection flow

The Ecipekac Layer I loader abuses policytool.exe, a legitimate application that is normally packaged in the IBM Development Package for Eclipse, to load a malicious DLL named ‘jli.dll’ in the current directory via the DLL side-loading technique. The ‘jli.dll’ file acts as the first layer of the Ecipekac loader. This DLL file has a number of export functions; however, all of them refer to a similar function that carries the main loading feature. The loader reads 0x40408 bytes of data from the end of another DLL – ‘vac.dll’ (where the data section starts at the offset of 0x66240). The data size of 0x40408 is derived from a hardcoded value, 0x40405, incremented until it’s divisible by eight.

MD5 f60f7a1736840a6149d478b23611d561
SHA1 5eb69114b2405a6ea0780b627cd68b86954a596b
SHA256 3b8ce709fc2cee5e7c037a242ac8c84e2e00bd597711093d7c0e85ec68e14a4c
Link time 2033-11-13 08:50:03
File type PE32+ executable (DLL) (GUI) x86-64, for MS Windows
Compiler Linker Version: 14.13, OS Version: 10.0
File size 681544 (666KB)
File name vac.dll
Embedded data at 0x66240
(size:0x40405)
00066240: febe d990 66de 1bc9 75b7 dc2c 3e1f 3ef2
00066250: 78d0 0005 5c27 a511 c122 bdf4 15e7 052c
00066260: af72 7e08 064c f7b9 70f0 57bf 250a 3b4d
[..skipped..]  
000a6630: ee4b b1f2 294d eea1 290e aba2 6954 130f
000a6640: 1267 9ab3 f800 0000

The ‘vac.dll’ DLL file is signed with a valid, legitimate digital signature, although the file has been tampered with. At first glance, the fact that its digital signature is valid would suggest the file has not been manipulated after being digitally signed.

APT10 and the A41 APT campaign 05

The signed digital certificate of vac.dll

However, what happened was that the actor resized the Certificate Table in the digitally signed ‘vac.dll’ and inserted their own data in the Certificate Table so it doesn’t affect the digital signature. This technique was published at BlackHat 2016 as MS13-098.

The layer I loader decrypts the layer II loader shellcode from the embedded data in ‘vac.dll’. Several crypto algorithms are used, such as XOR, AES and DES. The order and combination of algorithms, as well as the decryption keys, are different from one sample to another.

APT10 and the A41 APT campaign 06

Decryption flow in first loader

For example, in the sample shown above, the order of crypto algorithms was a one-byte XOR using the hardcoded key of ‘0x9F’, followed by an AES CBC mode decryption with the AES key ’83H4uREKfFClDH8ziYTH8xsBYa32p3wl’ and the IV key ’83H4uREKfFClDH8z’.

One interesting characteristic of Ecipekac is that the attackers implemented these cryptographic algorithms in their own code instead of using the Windows API. The attackers have also made slight modifications compared to the original implementation. For instance, in the function related to the AES algorithm, they intentionally referenced the third byte of the AES key as shown in the following code.

APT10 and the A41 APT campaign 07

A small modification in the AES function

Apart from the AES algorithm mentioned, the attackers have also modified the DES algorithm.

Ecipekac: Layer II loader shellcode

APT10 and the A41 APT campaign 08

Layer II of infection flow using Ecipekac

The Ecipekac Layer II loader is a simple shellcode which contains the data of the next layer DLL in disordered parts. At first, this shellcode checks for the magic string “ecipekac” in this data set. Then it reconstructs and loads each part of the embedded data into allocated memory in the correct order to create the original code of the DLL as shown below.

APT10 and the A41 APT campaign 09

Reconstruction for the divided PE BLOB in memory

Then it calls the entry point of the loaded DLL which is the third layer of Ecipekac. Based on our investigation, the magic string used in this module is not exclusively “ecipekac” in all instances. We also observed “9F 8F 7F 6F” and “BF AF BF AF” being used in several samples instead.

Ecipekac Layer III loader DLL

APT10 and the A41 APT campaign 10

Layer III of infection flow using Ecipekac

The third layer’s method of loading the next layer resembles the first layer. It reads encrypted data from the end of ‘pcasvc.dll’, which is signed using a digital certificate as is the case with ‘vac.dll’.

MD5 59747955a8874ff74ce415e56d8beb9c
SHA1 0543bfebff937039e304146c23bbde7693a67f4e
SHA256 a04849da674bc8153348301d2ff1103a7537ed2ee55a1588350ededa43ff09f6
Link time 2017-02-24 15:47:04
File type PE32+ executable (DLL) (console) x86-64, for MS Windows
Compiler Linker Version: 14.13, OS Version: 10.0
File size 733232 (717KB)
File name pcasvc.dll
Embedded data at 0x87408 (size:0x2BC28) 00087408: 98e4 1def 8519 d194 3c70 4e84 458a e34c
00087418: b145 74da c353 8cf8 1d70 d024 8a54 8bde
[..skipped..]  
000b3010: 2c1b 6736 8935 d55d 8090 0829 5dfc 7352
000b3020: 44bd c35b 9b23 1cb6 0000 0000 0000 0000

The crypto algorithms are again one-byte XOR and AES CBC mode, this time to decrypt the fourth loader shellcode from the embedded data of ‘pcasvc.dll’. However, the sequence of algorithms is in reverse order compared to the first layer. The hardcoded keys are also different: “0x5E” is used as the XOR key, while the AES key and IV are “K4jcj02QSLWp8lK9gMK9h7W0L9iB2eEW” and “K4jcj02QSLWp8lK9” respectively.

Ecipekac: Layer IV loader shellcode

APT10 and the A41 APT campaign 11

Layer IV of infection flow using Ecipekac

During our research, we found three different types of shellcode used as the fourth layer of Ecipekac.

Layer IV loader shellcode – first type

The first shellcode type’s procedure acts the same way as the Ecipekac Layer II shellcode, with the only difference being the embedded PE, which is the final payload of Ecipekac in this case. The payload of the first type shellcode is either “P8RAT” or “FYAnti loader”. An analysis of these payloads is provided in the later sections of this report.

Layer IV loader shellcode – second type

The second type of shellcode is totally different from the other loader types. This shellcode has a unique data structure shown in the table below.

Offset Example Data Description
0x000 90 90 90 90 90 90 90 90 magic number to check before proceeding to data processing.
0x008 0x11600 size of encrypted data
0x00C A9 5B 7B 84 9C CB CF E8 B6 79 F1 9F 05 B6 2B FE 16 bytes RC4 key
0x01C C7 36 7E 93 D3 07 1E 86 23 75 10 49 C8 AD 01 9F 6E D0 9F 06 85 97 B2
[skipped]
Encrypted payload (SodaMaster) by RC4

This shellcode confirms the presence of the magic number “90 90 90 90 90 90 90 90” at the beginning of this data structure, before proceeding to decrypt a payload at offset 0x01C using RC4 with a 16-byte key of “A9 5B 7B 84 9C CB CF E8 B6 79 F1 9F 05 B6 2B FE”. The decrypted payload is “SodaMaster”, and is described later in this report.

Layer IV loader shellcode – third type

The last type of shellcode is a Cobalt Strike stager. We have confirmed the use of several different Cobalt Strike stager shellcodes since October 2019. In addition, some of the observed Cobalt Strike stager samples included a setting in the HTTP header of their malicious communications to disguise them as common jQuery request in order to evade detection by security products.

APT10 and the A41 APT campaign 12

Hardcoded HTTP header to impersonate jQuery request

The actual hardcoded C2 used in the HTTP header for the C2 communication impersonating JQuery requests was “51.89.88[.]126” with the respective port 443.

Payloads of Ecipekac

APT10 and the A41 APT campaign 13

Payload of Infection flow using Ecipekac

As mentioned previously, apart from the Cobalt Strike stager, we observed three types of final payload implanted by the Ecipekac loader during this long-running campaign.

  • P8RAT
  • SodaMaster
  • FYAnti loader for QuasarRAT

The following timeline shows samples of the Ecipekac loader together with their respective filename and payload type based on a compilation timestamp of the first layer DLL:

APT10 and the A41 APT campaign 14

Timeline of the Ecipekac loader files and payloads

Cobalt Strike’s stager has been used throughout the research period. FYAntiLoader for QuasarRAT was monitored in October 2019, and has not been observed since then. Instead of this, SodaMaster and P8RAT were monitored from May 2020.

P8RAT

One of Ecipekac’s payloads is a new fileless malware which we call P8RAT (a.k.a GreetCake). P8RAT has the following unique data structure used to store the C2 communication configuration. We collected several samples of P8RAT during our research and found no C2 address of P8RAT that was used more than once. In total we found 10 backdoor commands in all the collected P8RAT samples. The most recent P8RAT sample, with the compilation timestamp of December 14, 2020, shows a new backdoor command with the code number of “309” implemented. The command “304”, which was present in earlier samples and carries similar functionality, was removed.

Command Description Compilation time of P8RAT
2020-03-30 2020-08-26 2020-12-14
300 Closing socket Enabled Enabled Enabled
301 Creating a thread for executing/loading a downloaded PE file Enabled Enabled Enabled
302 No functionality Enabled Removed Removed
303 Sending randomly generated data Enabled Enabled Enabled
304 Executing/loading downloaded PE/shellcode Enabled Removed Removed
305 Setting value of “Set Online Time” (the string was hardcoded in the P8RAT version compiled on 2020-03-30 and removed from the P8RAT version compiled on 2020-08-26). Enabled Enabled Enabled
306 Setting value of “Set Reconnect TimeOut” (the string was hardcoded in the P8RAT version compiled on 2020-03-30 and removed from the P8RAT version compiled on 2020-08-26). Enabled Enabled Enabled
307 Setting value of “Set Reconnect times” (the string was hardcoded in the P8RAT version compiled on 2020-03-30 and removed from the P8RAT version compiled on 2020-08-26). Enabled Enabled Enabled
308 Setting value of “Set Sleep time” (the string was hardcoded in the P8RAT version compiled on 2020-03-30 and removed from the P8RAT version compiled on 2020-08-26). Enabled Enabled Enabled
309 Creating thread for executing downloaded shellcode was implemented from the P8RAT version compiled on 2020-12-14. Not implemented Not implemented Enabled

The main purpose of P8RAT is downloading and executing payloads (consisting of PE and shellcode) from its C2 server. However, we were unable to obtain any sample of the subsequent payloads for this malware.

In the P8RAT sample from March 2020, hardcoded strings such as “Set Online Time”, “Set Reconnect TimeOut”, “Set Reconnect Times” and “Set Sleep Time” were used in regard to backdoor commands “305” to “308”, which point to the possible purpose of these commands. Based on these strings, which were removed from the P8RAT samples in August 2020, we speculate that these commands are possibly used to control the intervals of the C2 communication by defining sleep time, reconnect time and reconnect timeout in order to blend C2 communication with normal network traffic of the system.

In another update, the P8RAT sample from August 2020 looks for two process names (“VBoxService.exe” and “vmtoolsd.exe”) on the victim’s system, to detect VMware or VirtualBox environments at the beginning of its main malicious function.

APT10 and the A41 APT campaign 15

Hardcoded file names to detect VMware and VirtualBox

Interestingly the attacker made some modifications to P8RAT in December 2020, shortly after the publication of the two blogposts from Symantec on November 17, 2020, and LAC on December 1, 2020 (in Japanese). We strongly believe that this actor had examined these security vendors’ publications carefully and then modified P8RAT accordingly.

SodaMaster

Another payload of the Ecipekac loader, which we call SodaMaster (a.k.a DelfsCake), is also a new fileless malware. In our research we found more than 10 samples of SodaMaster. All the collected samples of this module were almost identical, with the offsets and hex patterns of all functions perfectly matching. The only differences were in the configuration data, including a hardcoded C2, an encoded RSA key and additional data for calculating a mutex value.

APT10 and the A41 APT campaign 16

Configuration of SodaMaster

When execution of this malware begins, it creates a mutex with a name in the reverse order of the CRC32 checksum calculated from the encoded RSA key and its following additional data. Then the malware randomly generates a value as an RC4 key for C2 communication. The first data block sent to the C2 server includes the user_name, the host_name, PID of the malware module, OS_version, socket_name, the generated RC4 key and the malware’s elapsed running time.

APT10 and the A41 APT campaign 17

C2 communication of SodaMaster

We confirmed four backdoor commands, coded as “d”, “f”, “l” and “s”, in the recent SodaMaster sample. In addition, we also discovered an old SodaMaster sample which has only two commands. A description of each command is shown in the following table.

Command Description Compilation time of SodaMaster
2019-01-07 2019-06-10
d Create thread for launching downloaded DLL and call export function of the DLL. Enabled Enabled
f Set value as RC4 key for the encrypted C2 communication Not implemented Enabled
l Set value as sleep time Not implemented Enabled
s Create thread for executing downloaded shellcode Enabled Enabled

Based on the analysis of the backdoor features of the SodaMaster module, the purpose of this malware is also to download and execute payloads (DLL or shellcode), like P8RAT. Unfortunately, we have not been able to obtain these payloads yet.

The SodaMaster module also shows an anti-VM feature. The malware looks for the presence of the registry key “HKEY_CLASSES_ROOT\Applications\VMwareHostOpen.exe” on the victim’s system before proceeding to its main functionality. This registry key is specific to the VMware environment.

APT10 and the A41 APT campaign 18

SodaMaster anti-VM check

Another characteristic of SodaMaster is the use of a common obfuscation technique known as “stackstrings” to create the registry key in double-byte characters. We observed the same obfuscation technique used for a process name and DLL name in other SodaMaster samples.

FYAnti loader for QuasarRAT

The last observed type of payload deployed by Ecipekac is a loader module named FYAnti loader. In the Ecipekac loader malware of the fourth layer, the DLL is loaded into memory and an export carrying the name “F**kY**Anti” is called. We named this loader “FYAnti” because of this distinct string. The execution flow of the FYAnti has two additional layers to implement the final stage, which is a QuasarRAT (a.k.a xRAT).

APT10 and the A41 APT campaign 19

Infection flow of FYAnti loader

The first layer of the FYAnti loader decrypts an embedded .NET module and executes it using the CppHostCLR technique. The .NET module is packed using “ConfuserEx v1.0.0” and acts as yet another loader that searches for a file in the “C:WindowsMicrosoft.NET” directory with file sizes between 100,000 and 500,000. The unpacked code is shown in the screenshot below.

APT10 and the A41 APT campaign 20

Unpacked code of the second layer loader of FYAnti to search a file

In this instance, an encrypted file named “web_lowtrust.config.uninnstall” is found and used as the next stage module. The .NET module loads and decrypts this file using AES CBC mode. The decrypted payload is another .NET module named Client.exe which is QuasarRAT, a popular open-source remote administration tool. The configuration data is stored in the binary with most of this data being encrypted by AES CFB mode and base64. The AES key is generated using the hardcoded string “KCYcz6PCYZ2VSiFyu2GU”in the configuration data.

APT10 and the A41 APT campaign 21

Malware configuration of QuasarRAT

All loader modules and payloads are decrypted and executed in memory only.

Attribution

Based on our investigations, we assess with high confidence that the APT10 threat actor is behind the A41APT campaign. This attribution is based on the following points:

First, the hardcoded URL “www.rare-coisns[.]com” from an x86 SodaMaster sample was mentioned in the report from ADEO regarding APT10’s activity targeting the finance and telecommunication sectors of Turkey, also fitting the geolocation of the VirusTotal submitter.

Second, the similarity of the A41APT campaign with APT10 activities described in a Cylance blogpost. These include the Ecipekac Loader, FYAnti loader’s unique export name “F**kY**Anti”, using the CppHostCLR technique and QuasarRAT used as the FYAnti’s final payload. Moreover, as stated in the Symantec blogpost, the FYAnti loader, the export name “F**kY**Anti”, CppHostCLR technique for injection of .NET loader and the QuasarRAT were similar to the activities of the APT10 group discovered by the BlackBerry Cylance threat research team.

Last but not least, there are some similarities and common TTPs to those outlined in our previous TIP report on APT10 activities:

  • Implementation of the hashing or crypto algorithms done manually by the malware developers instead of using Windows APIs, with some modifications;
  • Use of calculated hash values (fully or partially) for some features like crypto keys, part of the crypto keys, key generation, mutex names and so on;
  • Using the DLL side-loading technique to run a payload in memory;
  • Using PowerShell scripts for persistence and also for lateral movement;
  • Using exe for removing logs in order to hide their activities;
  • Sending victim machine data such as username, hostname, PID, current time and other specifics – though this point is not unique to APT10 backdoors and is quite common in most backdoor families;
  • Modifying implants shortly after security researchers publish their analysis of the actor’s activities and TTPs;
  • Targeting mainly Japan, alongside associated overseas branches or organizations related to Japan.

However, we observed some interesting differences in the A41APT campaign and previous activities:

  • P8RAT and SodaMaster did not contain a malware version number as opposed to the previous malware instances used by APT10 such as LilimRAT, Lodeinfo and ANEL;
  • As for the infection vector, we could not identify any spear-phishing email in this A41APT campaign, which is quite common in APT10 attacks.

Overall, APT10 is considered a large APT group running multiple simultaneous campaigns and, understandably, TTPs differ from one campaign to another. We believe the differences mentioned here for the A41APT campaign represent a normal variation of TTPs that can be expected in the case of such a large APT group.

Conclusions

We consider the A41APT campaign to be one of APT10’s long-running activities. This campaign introduced a very sophisticated multi-layer malware named Ecipekac and its payloads, which include different unique fileless malware such as P8RAT and SodaMaster.

In our opinion, the most significant aspect of the Ecipekac malware is that, apart from the large number of layers, the encrypted shellcodes were being inserted into digitally signed DLLs without affecting the validity of the digital signature. When this technique is used, some security solutions cannot detect these implants. Judging from main features of the P8RAT and SodaMaster backdoors, we believe that these modules are downloaders responsible for downloading further malware that, unfortunately, we have not been able to obtain so far in our investigation.

We see the activity outlined in this report as a continuation of the activity we previously reported in our Threat Intelligence Portal, where, in 2019, this threat actor began targeting overseas offices of Japanese associations or organizations using the ANEL malware. The operations and implants of the campaign described in this report are remarkably stealthy, making it difficult to track the threat actor’s activities. The main stealth features are the fileless implants, obfuscation, anti-VM and removal of activity tracks.

We will continue to investigate and track the activities of the APT10 actor, which are expected to keep improving its covertness with each year.

Appendix I – Indicators of Compromise

Note: The indicators in this section are valid at the time of publication. Any future changes will be directly updated in the corresponding .ioc file.

File Hashes (malicious documents, trojans, emails, decoys)

Ecipekac loader
be53764063bb1d054d78f2bf08fb90f3   jli.dll     P8RAT
cca46fc64425364774e5d5db782ddf54   vmtools.dll SodaMaster
dd672da5d367fd291d936c8cc03b6467   CCFIPC64.DLL      FYAnti loader

Encrypted Ecipekac Layer II, IV loader (shellcode)
md5   filename    payloads
f60f7a1736840a6149d478b23611d561   vac.dll     P8RAT
59747955a8874ff74ce415e56d8beb9c   pcasvc.dll  P8RAT
4638220ec2c6bc1406b5725c2d35edc3    wiaky002_CNC1755D.dll   SodaMaster
d37964a9f7f56aad9433676a6df9bd19    c_apo_ipoib6x.dll SodaMaster
335ce825da93ed3fdd4470634845dfea   msftedit.prf.cco  FYAnti loader
f4c4644e6d248399a12e2c75cf9e4bdf   msdtcuiu.adi.wdb  FYAnti loader

Encrypted QuasarRAT
md5   filename    payloads
019619318e1e3a77f3071fb297b85cf3   web_lowtrust.config.uninstall QuasarRAT

Domains and IPs

151.236.30[.]223
193.235.207[.]59
45.138.157[.]83
88.198.101[.]58
www.rare-coisns[.]com

Appendix II – MITRE ATT&CK Mapping

This table contains all the TTPs identified in the analysis of the activity described in this report.

Tactic Technique Technique Name
Initial Access T1133 External Remote Services

Uses vulnerabilities in Pulse Connect Secure to hijack a VPN session.

T1078 Valid Accounts

Uses stolen credentials to connect to the enterprise network as initial infection.

Execution T1059.001 Command and Scripting Interpreter: PowerShell

Uses PowerShell to download implants and remove logs.

T1053.005 Scheduled Task/Job: Scheduled Task

Creates a task for running a legitimate EXE with Ecipekac (malicious DLL) using DLL side-loading technique.

Persistence T1574.001 Hijack Execution Flow: DLL Search Order Hijacking

Uses a legitimate EXE file which loads Ecipekac (malicious DLL) in the current directory.

T1574.002 Hijack Execution Flow: DLL Side-Loading

Uses a legitimate EXE file which loads Ecipekac (malicious DLL) in the current directory.

T1053.005 Scheduled Task/Job: Scheduled Task

Creates a task for running a legitimate EXE with Ecipekac (malicious DLL) using DLL side-loading technique.

T1078 Scheduled Task/Job: Scheduled Task

Uses stolen credentials to connect to the enterprise network as initial infection.

Privilege Escalation T1574.001 Hijack Execution Flow: DLL Search Order Hijacking

Uses a legitimate EXE file which loads Ecipekac (malicious DLL) in the current directory.

T1574.002 Hijack Execution Flow: DLL Side-Loading

Uses a legitimate EXE file which loads Ecipekac (malicious DLL) in the current directory.

T1053.005 Scheduled Task/Job: Scheduled Task

Creates a task for running a legitimate EXE with Ecipekac (malicious DLL) using DLL side-loading technique.

T1078 Scheduled Task/Job: Scheduled Task

Uses stolen credentials to connect to the enterprise network as initial infection.

Defense Evasion T1574.001 Hijack Execution Flow: DLL Search Order Hijacking

Uses a legitimate EXE file which loads Ecipekac (malicious DLL) in the current directory.

T1574.002 Hijack Execution Flow: DLL Side-Loading

Uses a legitimate EXE file which loads Ecipekac (malicious DLL) in the current directory.

T1053.005 Scheduled Task/Job: Scheduled Task

Creates a task for running a legitimate EXE with Ecipekac (malicious DLL) using DLL side-loading technique.

T1078 Scheduled Task/Job: Scheduled Task

Uses stolen credentials to connect to the enterprise network as initial infection.

T1070.003 Indicator Removal on Host: Clear Command History

Removes Powershell execution logs using Wevtutil.exe.

T1036 Masquerading

Encrypted shellcode of Ecipekac was embedded in the legitimate DLL.

T1497.001 Virtualization/Sandbox Evasion: System Checks

Payloads of Ecipekac check a registry key and process names to identify VM environment.

Discovery T1057 Process Discovery

Checks the process of VMware and VirtualBox to identify the VM environment.

T1082 System Information Discovery

SodaMaster sends system information such as user_name, the host_name, PID of the malware module, OS_version, etc.

T1012 Query Registry

Checks a registry key of VMware to identify the VM environment.

Lateral Movement T1210 Exploitation of Remote Services

Uses vulnerabilities in Pulse Connect Secure to hijack a VPN session.

Command and Control T1071.001 Application Layer Protocol: Web Protocols

Cobalt Strike’s stager uses HTTP protocol for communication with C2 server to disguise as a common jQuery.

T1132.002 Data Encoding: Non-Standard Encoding

SodaMaster uses an original data structure and RSA for the first communication, then uses RC4 for encryption.

click here to read full Article

Read More on latest Security Updates

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: